www.2cv6.nl - /fotos/upload/Files/-Techniek specifiek GS/_Replace GSA Wheel bearings/


[To Parent Directory]

112122 01. Remove bearing ring nut.jpg
112816 02. Remove bearing ring nut.jpg
163922 03. Electrolytic Rust Removal 1.jpg
180918 04. Electrolytic Rust Removal 2.jpg
115636 05. Electrolytic Rust Removal Result.jpg
84177 06. Stub Axle painted with Zinc paint 1.jpg
83620 07. Stub Axle painted with Zinc paint 2.jpg
80420 08. Stub Axle painted with Zinc paint 3.jpg
89256 09. Stub Axle painted with Zinc paint 4.jpg
144103 10. Stub Axle painted black.jpg
115348 11. Stub Axle painted black.jpg
141958 12. Stub Axle painted black.jpg
131255 13. Wheel hub pained black.jpg
134212 14. Fit new bearing 1.jpg
164858 15. Fit new bearing 2.jpg
147836 16. Locking the new bearing with Ring nut.jpg
162767 17. Insert new seals.jpg
68616 18. Inner bearingpart.jpg
173125 19. Left side ready.jpg
145895 21. Clean up Right side.jpg
190827 22. Electrolytic Rust Removal Right.jpg
212029 23. Electrolytic Rust Removal Right side in proces.jpg
119546 24. After degreaseing painted with Zinc paint.jpg
99578 25. Same with Right wheel hub.jpg
153513 26. Ready for turning the ring nut.jpg
116439 27. Right side Ready.jpg
140283 New Bearing and seals (FOR GSA! 82 mm).jpg
132197 New seal measurements.jpg
158118 Original inner seal measurements= 72.05 x 55.8 x 7 DL.jpg
129135 Original outer seal measurements= 86.05 x 71.8 x 7 DL.jpg